Quick answer
Perth and Kinross stretches from the city of Perth to the Highland boundary, with many off-gas-grid homes on oil or LPG. Stone farmhouses and cottages have thick walls and small windows, so loft and floor insulation matter. A proper survey covers the cold-day design temperature, electrical supply and outdoor unit siting.
Perth and Kinross covers a huge area, from the Tay valley to the edge of the Highlands. Housing ranges from Perth sandstone to rural stone farmhouses, and many homes are off the gas grid — making them strong candidates for a heat pump.
Perth itself has sandstone terraces and villas around the city centre, with modern estates in Scone, Luncarty and Bridge of Earn. Further out, the housing becomes increasingly rural: stone farmhouses, cottages and steading conversions in Crieff, Blairgowrie, Aberfeldy and Pitlochry. These older properties often have thick stone walls, small windows and variable insulation. The surveyor checks loft insulation, wall construction and floor type, and the heat loss calculation accounts for the actual fabric of each room.
A large proportion of Perth and Kinross is off the gas grid, particularly in Highland Perthshire towards Pitlochry, Aberfeldy and Kinloch Rannoch. These homes are typically heated by oil, LPG or electric storage heaters, and they are often excellent candidates for a heat pump. The running cost comparison is more favourable than against mains gas, and the survey covers oil tank decommissioning, electrical supply capacity and any planning questions.
Perth and Kinross straddles the Highland boundary fault, and the cold-day design temperature drops as you move north. A home in Pitlochry or Aberfeldy needs a system designed for a colder cold-day than one in Perth or Kinross. The surveyor uses the correct local design temperature in the heat loss calculation, so the heat pump is sized for the weather you actually experience.
Perth city suburbs are generally permitted development, but conservation areas in Perth centre, Crieff and Pitlochry may require a planning application. Listed buildings and steading conversions in rural areas need listed building consent. The surveyor checks what applies to your property before any work is planned.
Yes, oil-heated farmhouses in Perthshire are often excellent candidates. The running cost comparison is favourable, and the survey covers oil tank decommissioning, electrical supply and outdoor unit siting. Steading conversions may need planning permission if listed.
The cold-day design temperature is lower in Pitlochry and Aberfeldy than in Perth itself, so the heat pump may need to be slightly larger. The surveyor uses the correct local design temperature in the heat loss calculation, so the system is sized for the coldest day you will actually experience.
Perth city suburbs are generally permitted development, but conservation areas in the centre, Crieff and Pitlochry may require a planning application. Listed buildings always need consent. The surveyor checks your address and tells you in writing.
SSEN covers Perth and Kinross. Your installer notifies them before the heat pump is connected. Rural properties may need an incoming supply upgrade, which is identified at survey stage.
Yes, but thick stone walls with small windows can lose significant heat, so the heat loss calculation is critical. The surveyor checks loft and floor insulation and may recommend improvements alongside the heat pump. Larger radiators may be needed in some rooms.
Reviewed by the Scottish Energy Efficiency team.
Fill in the form and we will send you a complete quotation — one that passes the six-line test. No obligation, no sales calls, no pressure.
