Quick answer
Lanarkshire covers a broad area from the Glasgow fringe to the South Lanarkshire hills, with post-war estates, former steel and coal communities, and rural stone cottages. Most homes are on the gas grid, but rural areas towards the Pentlands have off-grid properties. A survey covers radiator sizing, cylinder space and electrical supply.
Lanarkshire has a diverse housing stock, from dense post-war estates in the urban north to scattered stone cottages in the rural south. Each type needs a different approach to heat pump design.
North Lanarkshire, covering Motherwell, Hamilton, Coatbridge, Airdrie and Wishaw, has a high proportion of post-war council housing and modern estates with cavity walls. These properties often have reasonable insulation and are relatively straightforward for a heat pump, though radiator sizes may need checking. East Kilbride has similar post-war new-town housing. South Lanarkshire, covering East Kilbride, Hamilton, Lanark and Biggar, ranges from suburban estates to rural stone cottages and farmhouses towards the Pentland Hills.
Most of North Lanarkshire is on the gas grid, but rural South Lanarkshire towards the Pentland Hills, Tinto and the Coulter Heights has homes on oil or LPG. These properties are often good candidates for a heat pump, with a favourable running cost comparison. The survey covers fuel tank decommissioning, electrical supply and outdoor unit siting.
Lanarkshire sits in the Clyde valley and is relatively sheltered, but temperatures drop in the South Lanarkshire hills, particularly around Biggar and Tweedsmuir. The cold-day design temperature is lower in the southern uplands than in the urban north, which affects the heat pump size. The surveyor uses the correct local figure in the heat loss calculation.
Most Lanarkshire suburbs are permitted development, making the process simpler. Conservation areas in Lanark, Biggar and Strathaven may require a planning application. Listed buildings in rural areas need listed building consent. The surveyor checks what applies to your property.
Yes, post-war housing with cavity walls is often a good candidate for a heat pump. The survey checks radiator sizes, cylinder space and the electrical supply. Permitted development usually applies in these areas.
Yes, oil-heated homes in the South Lanarkshire hills are often good candidates. The survey covers fuel tank decommissioning, electrical supply and outdoor unit siting. Access may be more difficult on rural roads.
SP Energy Networks covers Lanarkshire. Your installer notifies them before the heat pump is connected. If the incoming supply needs upgrading, this is identified at survey stage.
Most Lanarkshire suburbs are permitted development, but conservation areas in Lanark, Biggar and Strathaven may require a planning application. The surveyor checks your address and tells you in writing.
Fitting a heat pump to a flat depends on where the outdoor unit can go and whether other owners need to agree. The surveyor checks access, pipe runs and electrical circuits. Some flats are suitable and some are not — we will tell you honestly.
Reviewed by the Scottish Energy Efficiency team.
Fill in the form and we will send you a complete quotation — one that passes the six-line test. No obligation, no sales calls, no pressure.
